Online Lumber Yard
Cabinet Woodworking Plans – The Basics in Building a Cabinet
You have thought about changing your kitchen or bathroom cabinets for years. Adding cabinets to a home is not restricted to just the kitchen or bathroom. Beautiful custom made cabinets are seen in bedrooms, dining rooms, home office and living or family rooms. The choices are endless and only limited by your imagination. The following is just the basic steps when putting together your cabinet woodworking plans.
In knowing how to build a cabinet that would suit the individual needs of a person can go a long way. Additionally, this can also help the individual save thousand of dollars especially since a lot of cabinetry shops can charge people anywhere from $5,000.00 to $100,000.00 to design and build cabinets for an average kitchen.
When choosing cabinet woodworking plans there are standards for the basic cabinet sizes. The standard base cabinet size for a kitchen is 34.5 inches tall and 24 inches deep. A wall cabinet has only one standard which is the depth of 12.5 inches.
Sketching the cabinet plan on a piece of paper with the measurements is the next step in your cabinet woodworking plans. Now it is time to put your materials list together for your trip to the lumber yard. Most cabinet boxes use fused melamine because it typically is cost effective and stands up well to moisture and normal wear and tear.
You should use 4′ X 8′ sheets of plywood or melamine 5/8″ or 3/4″ thick. Next, the person should acquire the edge band that will match the melamine and cabinet doors. For a fine finish look on your cabinets cover all exposed edges.
The person can then go to a shop where they have a chop saw, dado saw, table saw and wall saw. For precautionary measures, one must wear safety goggles when sawing and then carefully apply fused melamine sheet onto the wall saw. Since it is easier to cut first, the saw blade should be set to cut the cabinet length after which the person must use the saw to cut two same-size wood pieces for the cabinet. The next would be to set the blade at 24 inches and then cut the other length and make sure that it has two 34 1/2 by 24 inch sheets.
The next step would be to cut the top and bottom piece with a 24 inch depth along the width of their choice. Next would be to band the side with the chosen length. Take note that one must not band the 24 inch side. One then needs to set up a closed dado and then dado both ends of both pieces of the wood and subsequently fasten a staple gun up to an air hose. To ensure that the sides are secured tightly on the top and bottom parts, it is highly recommended to use 1 and a half inch staples.
You then place the bottom piece in the bottom dado of the cabinet and staple it. This must also be done to both sides of the cabinet before doing the top piece. If you are building a face frame cabinet you can use matching melamine for the face frame, or you can then stain the face of the cabinet to match custom doors.
About the Author
There is no other project you can do for your home that adds more value than a kitchen or bathroom remodel. A unique design in cabinet woodworking plans turns this project into a work of art. For more information on this important first step let us help you visit =>
The Lumberyard Rotisserie & Grill, Family Dining in Cannon Beach, Oregon
